Friedman_Chang64692@qq.com 86-592-5631497

HARSHMET MATERIAL SOLUTIONS LTD.

  • Phone

    86-592-5631497

  • Address

    Block 233~234, Xiangbei Industrial Park, Ma Xiang Cun, Xiangan District, P. R China, Xiamen, Fujian, China

  • E-mail

    k@waimaotong.com

LatestProducts
Hot Sell
Home > Sell
EPDM Cold Shrink Sleeve for RF Coaxial Cable and Power Cable

EPDM Cold Shrink Sleeve for RF Coaxial Cable and Power Cable

sleeve coaxial
INQUIRY PRECISE INQUIRY
Description

Basic Info
  • Model NO.: CPE-TP
  • Color: Black or Gray
  • Cable Type: Coaxial Cable and Power Cable
  • Cross Reference: 3m 8420 Pst Cold Shrink
  • Transport Package: Standard Package
  • Origin: China
  • Application: RF Coaxial Connectors Weatherproofing
  • Connector Type: DIN, N and Mini DIN
  • Material: EPDM Rubber
  • Trademark: HarshSeal
  • Specification: CPE
  • HS Code: 8547200000
Product Description
HarshMet Cold Shrinkable EPDM Sleeve CPE Series
For Electrical, Telecom and Industrial Applications
 
Description
 
HarshMet Cold Shrinkable sleeves are a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. A wide range of diameter sizes and lengths will cover a range of 1000 volt cables, copper and aluminium conductors.
 
Features
 
Simple installation, requires only workman's hands
Accommodates a wide range of cable sizes
No torches or heat required  
Good thermal stability
Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure
Excellent wet electrical properties
Improved tough rubber formulation to with stand rough backfilling
Resists fungus v Resists acids and alkalis
Resists ozone and ultraviolet light
 
Applications
 
Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splices rated to 1000 volts
Directly buriable or submersible
For indoor, outdoor, or overhead use
Physical protection and moisture sealing for high-voltage, air-insulated connectors and lugs such as spacer cable and lug connections to bus bar
Insulation of secondary splices copper or aluminium conductors
Relocation of service v Dig-in repairs
Sheath repairs
Insulation of inline conductor transition connectors
Sealing of jumper-to-feeder and jumper-to-equipment RF coax connections
 
Mechanical & Electrical Properties
 
Properties Typical Value Testing Method
300% Modulus 3.5 Mpa ASTM D412-75
Ultimate Tensile Strength 11.8 MPa ASTM D 412-75
Ultimate Elongation 750% ASTM D 412-75
Die C Tear 38.6N/mm ASTM D624C-73
Dielectric Strength 19.1KV/mm ASTM D149-75
     Moisture Absorption Wt. Gain 1.3% 24 hrs, 90°C, HO
Hardness         49A ASTM 2240
 
 
Selection Table
 
P/N  Inside Diameter of Supporting Spiral (MM) Application Range,MM Recovered Length,MM материал
CPE18 18 7.2~14.3 80-1000 EPDM
CPE25 25 10.1~20.9 150-1000 EPDM
CPE32 32 12.9-27 120-1000 EPDM
CPE35 35 13~30.1 120-1000 EPDM
CPE40 40 15~35 120-1000 EPDM
CPE42 42 15~36 120-1000 EPDM
CPE50 50  17-44 150-1500 EPDM
CPE58 58 23.5-50 150-1500 EPDM
CPE65 65 27~58 150-1500 EPDM
CPE68 70 23~61.5 150-1500 EPDM
CPE77 77 26~70 152-1500 EPDM
CPE90 90 34.5-83 150-1500 EPDM
CPE105 105 41.6~95 150-1500 EPDM
CPE120 120 46~110 150-1500 EPDM
CPE126 126 56-119.5 203-1500 EPDM
CPE140 140 60-126 230-1500 EPDM
CPE155 155 70-147 254-1500 EPDM
.....        

Related Sell